• 服務熱線

    15021010459
    產品中心
    當前位置:主頁 > 產品中心 > 其他 > DEX40 >10% LMD in 5% Dextrose Injection

    10% LMD in 5% Dextrose Injection

    簡要描述:LMD (dextran 40) is a sterile, nonpyrogenic preparation of low molecular weight dextran (average mol.
    wt. 40,000) in 5% Dextrose Injection or 0.9% Sodium Chloride Injection.

    • 產品型號:0409-7418-03
    • 廠商性質:代理商
    • 更新時間:2025-02-13
    • 訪  問  量:2292
    詳細介紹

    10% LMD
    in 5% Dextrose Injection
    DEXTRAN 40 IN DEXTROSE INJECTION, USP

    EACH 100 mL CONTAINS 10g DEXTRAN 40, 5g DEXTROSE,
    HYDROUS. 255 mOsmol/LITER (CALC.). pH 4.4 (3.0 TO 7.0)
    STERILE, NONPYROGENIC.

    ADDITIVE MEDICATIONS SHOULD NOT BE DELIVERED VIA
    PLASMA VOLUME EXPANDERS.

    SINGLE-DOSE CONTAINER. CONTAINS NO BACTERIOSTAT.
    DISCARD UNUSED PORTION. FOR INTRAVENOUS USE.
    USUAL DOSAGE: SEE INSERT. STORE AT 20 TO 25°C (68 TO
    77°F). [SEE USP CONTROLLED ROOM TEMPERATURE.]
    PROTECT FROM FREEZING. DO NOT USE IF
    CRYSTALLIZATION HAS OCCURRED. USE ONLY IF SOLUTION
    IS CLEAR AND CONTAINER IS UNDAMAGED. MUST NOT BE
    USED IN SERIES CONNECTIONS.

    DESCRIPTION 
    LMD (dextran 40) is a sterile, nonpyrogenic preparation of low molecular weight dextran (average mol. wt. 40,000) in 5% Dextrose Injection or 0.9% Sodium Chloride Injection. It is administered by intravenous infusion. 
    Also described as low viscous or low viscosity dextran, dextran 40 is prepared by acid hydrolysis and The structural formula for dextran (repeating unit) is: 
     Dextrose, USP is chemically designated D-glucose monohydrate (C6 H12 O6 ? H2O), a hexose sugar freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. 
    Water for Injection, USP is chemically designated H2O. 
    The flexible plastic container is fabricated from a specially formulatedpolyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of the chemical components of the plastic in very small amounts before the expiration period is attained. However, safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. 


    differential fractionation of a crude macromolecular polysaccharide produced from the fermentation of sucrose by the bacterium, Leuconostoc mesenteroides (strain B-512). The crude material is composed of linked glucose units. In the fraction represented by dextran 40, 80% of the molecules have a molecular weight ranging from 10,000 to 90,000 (average approximay 40,000) when measured by a light 
    scattering method. More than 90% of the linkages are of the 1,6 alpha glucosidic, straight chain type. Each 100 mL of 10% LMD (dextran 40) in 5% Dextrose Injection contains 10 g dextran 40 and 5 g dextrose hydrous in water for injection. Total osmolar concentration is 255 mOsmol/liter (calc.); pH is 4.4 
    (3.0 to 7.0). Each 100 mL of 10% LMD (dextran 40) in 0.9% Sodium Chloride Injection contains 10 g dextran 40 and 0.9 g sodium chloride in water for injection. Total osmolar concentration is 310 mOsmol/liter (calc.); pH is 4.9 (3.5 to 7.0) (may contain sodium hydroxide and/or hydrochloric acid for pH adjustment). Electrolyte concentration per liter: Na+ 154 mEq; Clˉ 154 mEq (not including ions for pH adjustment). 
    The solutions contain no bacteriostat, antimicrobial agent or added buffers (except for pH adjustment) and are intended only for single-dose injection. When smaller doses are required the unused portion should be discarded. 
    10% LMD (dextran 40) is an artificial colloid pharmacologically classified as a plasma volume expander; 5% Dextrose Injection is a fluid and nutrient replenisher; 0.9% Sodium Chloride Injection is a fluid and electrolyte replenisher. 
    Dextran 40 is a linear glucose polymer (polysaccharide) chemically designated (C6 H10 O5)n.

    AVAILABILITY

    Limited Inventory: 0409-7418-03Additional Information:  See below for more information regarding specific products. View additional information and potential alternatives.

    ClassPlasma Volume Expander

    Generic NameDextran 40 in Dextrose Injection, USP

    NDC NumberStrengthTotal VolumeProduct ImageContainer TypeCap ColorNon-DEHPLatex InformationPreservative-FreeOrder SizeProduct Information












    0409-7418-0310%500 mL10% LMD in 5% Dextrose Injection (Dextran 40 in Dextrose Injection, USP)Flexible ContainerN/A
    YesYes1 Case (12) 













    現貨供應,歡迎訂購!:    


     


    產品咨詢

    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7
    推薦產品

    2025 版權所有 © 重慶市華雅干細胞技術有限公司  備案號:渝ICP備14000349號-4 sitemap.xml 管理登陸 技術支持:化工儀器網

    地址:重慶市江北區金渝大道153號8棟20-14 傳真:023-63419626 郵件:sales@ys-bio.com

    重慶市華雅干細胞技術有限公司主要經營干細胞研究 干細胞治療產品 生物試劑 實驗耗材 藥物研發等產品。

    關注我們

    服務熱線

    400-021-2200

    掃一掃,關注我們

    主站蜘蛛池模板: 精品久久久久久国产三级| 久久久久久无码国产精品中文字幕 | 久久国产精品无码HDAV| 国产日韩高清三级精品人成| 97久久综合精品久久久综合| 日本精品视频在线观看| 欧美精品亚洲精品日韩1818| 88国产精品无码一区二区三区| 香蕉久久夜色精品升级完成 | 国产精品日韩AV在线播放| 日韩AV毛片精品久久久| 成人精品一区二区久久久| 国产精品成熟老女人视频| 亚洲欧美精品综合中文字幕| 国内精品99亚洲免费高清| 亚洲精品欧美日韩| 国产成人精品日本亚洲18图| 日本午夜精品一区二区三区电影| 精品久久久久久国产三级 | 亚洲精品网站在线观看不卡无广告 | 亚洲欧美精品伊人久久| 97久久国产亚洲精品超碰热| 亚洲AV成人精品网站在线播放| 欧美精品VIDEOSEX极品| 精品精品国产欧美在线小说区 | 97精品久久天干天天天按摩| 无码久久精品国产亚洲Av影片| 日韩美女18网站久久精品| 欧美亚洲综合免费精品高清在线观看| 2020最新久久久视精品爱| 亚洲中文字幕久久精品无码APP| 精品黑人一区二区三区| 无码精品国产VA在线观看DVD | 亚洲AV无码精品色午夜果冻不卡| 久久www免费人成精品香蕉| 国产美女精品一区二区三区| 青青青国产精品一区二区| 亚洲人成国产精品无码| 欧美成人精品欧美一级乱黄码| 狠狠精品久久久无码中文字幕 | 合区精品久久久中文字幕一区 |